MARKING IMAGES
TO MARK A SINGLE IMAGE
1
Use the arrows on the
4-way controller to select the image to be
marked in Contact Sheet or Single-Image View.
2
Press MOD to display the Modification
Menu.
3
Use the arrows on the 4-way
controller to select the Mark Menu.
4
Use the arrows on the 4-way
controller to select “Mark”.
· If the selected image is already marked, the
“Mark” menu item will change to “Unmark”.
5
Press OK to mark the image. A flag icon
will appear in the upper-right corner of the
image indicating that the image is marked.
TIP
·To unmark a marked image, select the marked image and follow the same steps
as above.
·If the Mark Menu was opened from Jump Mode, the “Mark” menu item will not
be available.
·The OK button can be used as a shortcut key for marking images. (See
P.90)
86