SIIG 4590, 4110 manual Hardware Installation

Hardware Installation

General instructions for installing the card are provided below. Since the design of notebook computers may vary, refer to your system’s reference manual for further information, if needed.

1.Power off your notebook computer and any other connected peripheral devices.

2.Insert the PC Card into the PC Card slot of your notebook computer with its 68-pin connector facing the slot. Make sure it is inserted all the way in for a solid connection.

3.Plug the RJ45-to-9-pin serial port cable into the Single-Serial PC Card.

4.Power on your notebook computer.

Figure 1: Inserting PC Card

2