SIIG 700 manual Software Installation, Windows Driver Installation, Windows ME

Software Installation

This section provides information on how to install the FireWire 800 CardBus DV-Kitsoftware.

Windows Driver Installation

Windows 98SE

1.At the Add New Hardware Wizard, click Next.

2.Select Search for the best driver for your device (Recommended), then click Next.

3.Insert the driver CD, check CD-ROM drive, uncheck the other boxes, then click Next.

4.Click Next, then Next again.

5.If prompted for the Windows 98SE CD, insert it, then click OK.

6.Click Finish and restart Windows to complete the installation.

Windows ME

1.At the Add New Hardware Wizard, insert the driver CD, select Automatic Search for a better driver, then click Next.

2.Click Finish.

3.Click Yes to restart Windows and complete the installation.

Windows 2000

Windows 2000 automatically installs it's built-in 1394a driver. To get the full speed out of this controller, install the Firewire 800 driver using the directions below.

1.Right click My Computer, click Manage, then click Device Manager.

4