![](/images/new-backgrounds/1200284/20028429x1.webp)
I V . O P E R A T I O N
6.Turn and hold the key counterclockwise to raise the lift. See figure 10. Continue to raise the lift until the motor stops, then release the key.
NOTE: As the lift platform rises, the automatic
NOTE: The motor will stop automatically at the top of its stroke and will emit a clicking sound. Release the key immediately upon hearing this sound, then turn the key counterclockwise one more time for no more than 2 seconds to ensure the platform is in the fully raised position.
NOTE: Pay attention to the path of the lift platform during operation. Make sure the lift does not rub against or interfere with the vehicle in any way. If you notice any contact between the lift platform and the vehicle, stop lift operation immediately and contact your authorized Pride Provider for assistance.
Follow these steps to remove a mobility device from the Exterior Lift System:
1.Lower the lift platform to the ground.
2.Unfasten the
!Unlock and loosen the
!Rotate the adjustment lever only on each strap forward and rearward in a ratcheting motion until each strap reaches its original furled position.
3.Unload the mobility device from the lift platform.
4.Raise the lift platform for storage, noting that it will automatically fold into a stowed position.
5.Remove the key from the lift system when it is not in use.
WARNING! Do not attempt to manually pull the lift platform down from the stowed position. Doing so will result in product damage and will void the product warranty.
MANUAL EXTERIOR LIFT OPERATION
The lift system is equipped with a manual crank that serves as backup in the event of a power failure. Using the supplied tool, rotate the manual crank (located on top of the motor housing) clockwise or counterclockwise to move the plat- form up or down. See figure 15.
MANUAL CRANK
MOTOR HOUSING
Figure 15. Manual Crank Operation
Exterior Lift System | www.silverstarmobility.com | 15 |