- 6 -
The appliance components
q Mounting plate/Baseplate
w Power cable
e Wire aerial
r Display
t ON/OFF - On/o switch, radio function
y DOWN - Selection button down
u UP - Selection button up
i PRESET — - for the selection of memory slots
o PRESET + - for the selection of memory slots
a Batter y compartment
s A .O.T./SNOOZE - control for the timer switch o /
snooze button
d MEMORY/ - Save button/button lock
f TIMER - control for the timer programming
g MODE/BASS - activates the super bass function
switches to display options
h VOL. — - Volume decrease
ALARM SET q - alarm function 1 control
j VOL. + - Volume increase
ALARM SET w - alarm function 2 control
Setting up the appliance
First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
1. Open the lid of the battery compartment a on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
Otherwise, the memory receipt will not function and dam-
age may be caused to the appliance.
3. Close the lid of the battery compartment a.
The lid must audibly engage.
Note:
The back-up batteries must be checked at least once
per year and, if necessary, exchanged for new ones.