Important!
•Should the care instructions for a clothing article
not mention ironing, (Symbol 
), you should not iron that clothing article. You could otherwise
cause damage to the clothing article.
•You may only fill the water reservoir with tap water. You will otherwise damage the steam iron.
•You may not clean the steam iron with solvents, alcohol or abrasive cleaning agents. You could otherwise cause damages.
Proper use
The steam iron is strictly intended for ironing clothes. You may only use the iron in a closed room and in the private household. All other use is deemed improper use.
Items supplied
Steam iron
Measuring beaker
Operating instructions
Before the First Use
•Remove the steam iron from the packaging.
•Remove all stickers and films from the steam iron and the gliding sole r.
Important!
Plastic bags can present a danger. To avoid any danger of suffocation, keep this bag away from babies and children.
•Plug the power plug into a power socket of 220 - 230 V~/50 Hz.
•Hold the steam iron horizontally.
•Set the temperature control a to the position "MAX“.
•Heat the steam iron for several minutes on the highest setting.
•Press the button a few times for the steam blast i.
•Iron on a piece of scrap material to remove any possible unclean patches from the gliding sole r.
Operating Elements
Figure 1
q Movable cable guide w Temperature control light e Standing foot
r Gliding sole t Water nozzle
y Filler opening for the water reservoir u Steam amount control
i Button for the steam spray o Button for water fog
a Temperature control
sHandle
d Measuring cup
Operation
Filling with Tap Water
•When it is cool, place the steam iron in a horizontal position on its gliding sole r.
•Open the filler opening for the water reservoir y.
•Fill the reservoir with tap water using the measu- ring cup d, at most to the "MAX" marking.
Notice
Should the mains water at your locality be rated as hard, it is recommended that you mix mains water with some distilled water. Otherwise, the jets for the steam blast function could calcify (become blocked) prematurely.
To extend the optimal steam blast function, mix mains water with distilled water according to the table.
- 3 -
