Items supplied
Tower Fan
Plinth (2 pieces)
Nut (assembled on
Operating instructions
Check the items supplied for completeness directly after unpacking. Remove all packaging material.
Technical data
Mains voltage: | 220 - 240 V~, 50 Hz |
Power consumption: | 45 W |
Protection class: | II / |
Appliance description
1 Switch for oscillation
2
3 Plinth
4 Recess for power cable
5 Connection nut
6 Switch 3 (high speed)
7 Switch 2 (medium speed)
8 Switch 1 (slow speed)
9 Switch "OFF"
0 Rotary switch (Timer function)
Before taking into use
1.Unscrew the connection nut 5 from the screw- thread 2 on the ventilator tower.
2.Combine the two parts of the plinth 3 together so that they form a circular plate and the pins protrude into the recesses.
3.Insert the
4.Rescrew the connection nut 5 handtight onto the
5.Stand the ventilator upright.
6.Connect the plug with a wall power socket.
Operation
1.Position the rotary switch 0 at "ON".
2.Select the desired speed level by using the switches: 1 8= slow speed
2 7= medium speed
3 6= high speed
3.To switch the ventilator off for a short period, press the button "OFF" 9. To completely switch the ventilator off, press the button "OFF" 9 and position the rotary switch 0 at "0".
Oscillation (Turn function)
Oscillation (Turn function)
•If you wish to activate the rotation function (oscil-
lation), place the switch "Oscillation" 
1 at the position ON.
•To switch the rotation function off, place the
switch "Oscillation" 
1 at the position OFF.
Timer-Function
You can programme the ventilator to run for a specific time (up to 120 minutes). It switches itself off on expiry of the time period.
1.Place the rotary switch 0 at the required operating time.
2.Select the required speed level.
On expiry of the selected time period, the ventilator switches itself off.
- 2 -
