Sim2 Multimedia 55M specifications Examples, Color Temperature, Gamma, Memory

SIM2 DOMINO 55M

RS-232C CONTROL SPECIFICATIONS

(1)Returned value is indeterminate when the unit is in No Signal state.

Returned value may be different from the value displayed on the OSD, as in the latter, the values have been normalized to the 0-100 range.

(2)Returned value is valid only when Video, S-Video, RGBS 15 kHz, YCrCb 15 kHz or YcrCb 32 kHz signals are displayed. Returned value is indeterminate when other signals are displayed and when the unit is in No Signal state.

(3)Returned value is valid only when Video (NTSC), S-Video (NTSC), RGBS 15 kHz, YCrCb 15 kHz signals are displayed. Returned value is indeterminate when other signals are displayed and when the unit is in No Signal state.

(4)Table below associates OSD labels with returned values:

Color Temperature

OSD	Returned
Label	value
High	24
Medium	25
Low	26
User	27

(5)Table below associates OSD labels with returned values:

Gamma

		OSD	Returned
		Label	value
		Film	10
		Film 1	0B
		Video	0D
		Video 1	0F
		Graphics	0C
(6)	Table below associates OSD labels with returned values:
		Memory
		OSD	Returned
		Label	value
		0 (Auto)	00
		1	01
		2	02
		3	03

5. Examples

1.Send the simulated "SWITCH ON FROM STAND-BY AND SELECT SOURCE" Remote Control keycode.

Remote Control allows Switching on from Stand-by via one of the keys "1", "2" ... "7". Send, for instance, the code relative to key "1":

BEEF02060080E5490100000000.

The DOMINO 55M switches on and selects Input 1.

The DOMINO 55M returns the response code: 06 (Acknowledged with no error).

NOTE: Commands that simulate keys "1", "2" ... "7" switch on the unit and select the corresponding Source.

11