Sima Products SUP-70 instruction manual Com.simacorp.www, Operation

Connector

Output

com.simacorp.www
800	Call
345.
Customer
7462
.	Can’t
find
Serviceyour
plug?

Adapter Power Universal

.camcorders and cameras digital For 70-SUP Model

		.state to state from
vary which rights, other have may you and
rights legal specific you gives warranty This
.you to apply not may exclusion or limitation
above the so damages, consequential
or incidental of limitation or exclusion
the for allow not do states Some .excluded
specifically is		damages consequential
or	incidental	for liability All.repairs
unauthorized or negligence misuse, abuse, by
caused are defects any if void is warranty This
		15139 PA Oakmont,
		#5 .Bldg
		.Ave Pennsylvania 140
		Service Customer Attn:
	Corporation Products Sima
	to: problem of description and purchase of
place and date of proof reasonable including
paid,-pre freight unit, your Ship Conditions:
		.purchase
original the of days ten within card registration
product enclosed the Mail .option Sima’s
at replaced or repaired be will product the
period, warranty the During .purchase of date
the from days 90 of period a for workmanship
and materials in defects against product
this warrants Corporation Products Sima
	Warranty Limited day-90

Introduction

Congratulations on your purchase of the Sima SUP-70 Universal Power Adapter. It can power digital cameras, camcorders and other portable electronic devices requiring 3.3 / 4.2 /

5.0/ 6.5 / 8.4 or 9.5V DC power. It is fully regulated using high efficiency switching technology and features overload and short circuit protection. The SUP-70 comes with seven connectors to fit digital cameras and other electronic devices. Additional connectors are available from Sima. For connectors that are not included in this package, call 800-345-7462.

This package Includes:

7 Center pin positive connectors 1 12V car plug 1 SUP-70 1 EU adapter prong 1 Manual

Operation

1.Set the output voltage switch, as illustrated in Fig. 1, to the desired output for your device. Choose from these settings: 3.3 / 4.2 / 5.0 / 6.5 / 8.4 or 9.5 V.

The SUP-70 comes with seven standard connectors. The connectors allow you to match the size and polarity of your device’s DC input jack. If your device requires other types of connectors, contact Sima customer

service at 800-345-7462.

The connectors supplied with the SUP-70 are all set in a center pin positive alignment ( Fig. A) If your device requires a center pin negative

power source (Fig. B) do not use this adapter.

	Fig. A		Fig. B
+	OK	-	No
	-		+

To determine the required current and correct polarity for your device, refer to the manufacturer’s instruction manual or specifications

12V DC	Fold-in 120V AC prongs
car plug

12V DC input

Output
Voltage Switch	Output
Fig. 1	line

2. Select the appropriate connector and attach it to the output socket

at the end of the output cord. The connectors are numbered as follows: 1, 2, 4, 5, 13, & 17. To identify the correct connector for

your camera, see the list of digital cameras on the reverse side of this sheet. If unsure, use the connector that fits the power jack of your camera. The three-pin connectors are designed to fit into the socket in only one position. Align the pins as shown at right in Fig.

2.Do not force.

3.Insert the connector into the power jack on your portable device.

Fig. 3	4. Next, unfold the prong set, as shown in Fig.	Fig. 2
	3 at left, and plug the SUP-70 into a standard
	AC wall outlet. (To use the 12V car plug, plug the car cord into the SUP		-
	70 as shown in Fig. 1 and plug the car cord into a car lighter or 12V
	socket.) The blue power light on the front of the SUP-70 should turn on.

IMPORTANT: Your portable device must be rated between 3 - 10V DC and no more than 2100 mA of current to use the SUP-70. If the exact voltage for your device is not listed below and is

less than 10V, you can try setting the voltage switch to the nearest voltage – use the lower
		setting first. If the device does not operate, disconnect the
		connector from the device, reset the voltage switch to the
	EU Prong	next higher setting and re-connect. Do not continue
		trying higher settings as they may result in damage to
	Set
		your device or the adapter.
	The SUP-70 comes	The SUP-70’s current (mA) must be equal to or greater
		than the current your portable device requires. Remember
	with a prong set for
		1A = 1000mA, 0.5A = 500mA. Use the following chart to
	use in Europe.
		determine the output current from the SUP-70:
	Note: The prong set
	does not convert	Output		Max.	Output		Max.
	120V AC to 240 V AC.
To attach, slide the EU prong set		Voltage		Current	Voltage		Current
		3.3V	=	2.1A	6.5V	=	1.7A
down over top of the US prongs,
		4.2V	=	2.0A	8.4V	=	1.6A
while	they are folded in, as
		5.0V	=	1.9 A	9.5V	=	1.5A
shown	above.

Resetting the Adapter

CAUTION: If the power light turns off, check the power source. If on, the output current may be beyond the AC adapter’s specifications and the overload protection has been activated.

To reset the adapter:

1.Disconnect the AC adapter from the AC outlet and the device you are powering. Wait 10 seconds.

2.Plug the AC adapter into the AC outlet again. If the indicator remains off, there may be a problem with the AC adapter. Contact Sima customer service for assistance.