Simaudio MOON Evolution Series owner manual Specifications, MOON Andromeda CD Player

MOON Andromeda CD Player

Specifications

Configuration			Fully balanced, dual-mono
Digital Power Supply Transformer			75VA
Analog Power Supply Transformer			22.5VA
Digital Power Supply Capacitance			17,600µF
Analog Power Supply Capacitance			20,000µF
Transport Mechanism	.............................................		Philips CD-Pro 2 M
Digital Filter			BurrBrown DF1704
Digital-to-Analog Converters		...................................	BurrBrown PCM1704U-K x 4
Frequency Response	(audible)		20Hz - 20kHz +0/-0.1dB
Frequency Response	(full range)		5Hz - 56kHz +0/-3dB
THD @1kHz, 0dBFS (A-weighted)			< 0.001%
Intermodulation Distortion			< 0.003%
Dynamic Range			> 120dB
Signal-to-noise Ratio	..............................................		> 125dB @ full output
Slew Rate			50V/µs
Channel Separation			> 118dB
Low Level Linearity			< ±0.5dB at -90dBFS
Intrinsic Jitter			< 10 picoseconds RMS
Analog Outputs – Balanced			1 pair XLR
Max. Analog Output @ 0dBFS		- XLR	4.0 Volts
Analog Output Impedance -		XLR	50Ω
Analog Outputs – Single Ended			1 pair RCA
Analog Output Impedance -		RCA	50Ω
Max. Analog Output @ 0dBFS		- RCA	2.0 Volts
Digital Input			S/PDIF (BNC)
Digital Outputs (2)			S/PDIF (BNC) and AES/EBU (XLR)
Digital Output Impedance - S/PDIF			75Ω (0.5 Volts p-p)
Digital Output Impedance - AES/EBU			110Ω (3.7 Volts p-p)
Remote Control			All Aluminum Full-Function
Display Type			8 character dot matrix LED
Power Consumption @ idle			25 Watts
AC Power Requirements			120V / 60Hz or 240V / 50Hz
Shipping Weight			79 lbs / 35 Kgs
Dimensions – CD Player (W x H x D, inches)			18.75 x 5.5 x 16.5
Dimensions – Power Supply (W x H x D, inches)			18.75 x 4 x 16.5
Balanced Pin Assignment: Pin 1			Ground
	Pin 2		Positive
	Pin 3		Negative

NOTE: In the event that you require the RS-232 codes for your MOON Andromeda, please contact Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone (877-980-2400).

Fuse Replacement:	For the 120V version use a 0.5A slow blow	(5 x 20mm size).
	For the 230V version use a 0.25A slow blow	(5 x 20mm size).

____________________________________________________________________________________

Specifications 15