Simaudio W-7 owner manual Bridged-Mono Operation

MOON W-7 Dual-Mono Power Amplifier

Bridged-Mono Operation

Figure 3: Bridged-Mono operation of the MOON W-7 Dual-Mono Amplifier

In the event that you wish to operate the MOON W-7Dual-Mono Power Amplifier as a monoblock amplifier, it can be converted to bridged mode without any complex modifications. Only a Simaudio XLR-BRIDGE Y-cable is required. This custom cable will allow one input signal to be sent to both channels of the amplifier’s inputs, as pictured above in Figure 3. One lead from the “Y” adapter must plug into right channel input and the other lead must plug into left channel input. As well, you must use the positive terminal of each output binding post (exactly as in figure 3) for the loudspeaker connection. If you are unsure about how to accomplish a bridged-mono mode of operation, don’t hesitate to contact your Simaudio MOON dealer.

The MOON W-7produces 600 watts of output power at 8 ohms for a single channel when operating in bridged-mono mode.

____________________________________________________________________________________

Bridged-Mono Operation 9