Controls
& Operation
SNOWTHROWER CONTROLS
Auger Control
A.Auger Control - This control engages and disen- gages the auger. Pull the control back against handle to engage the auger, (this will pull snowthrower for- ward if auger is in contact with the ground). Release the Auger Control to stop rotation of auger.
Deflector Controls
B.Chute Direction Control - The Chute Direction Control (B, Figures 6 & 7) allows the discharge chute to be rotated to throw snow in the desired direction. Snow may be thrown at any angle from straight left to straight forward, to straight right.
The length of the chute direction control can be adjusted. Remove the cotter pin (A, Figure 6) to extend or shorten the rod to desired length, then rein- stall the pin.
C.Chute Deflector - Controls the distance snow is thrown. Tilting the Chute Deflector (C, Figure 7) UP provides a higher stream and greater distance, while tilting the deflector DOWN provides a lower stream and less distance.
A |
B |
Figure 6. Discharge Chute Control Adjustment
A.Cotter Pin
B.Chute Direction Control
A |
B |
C |
Figure 7. Snowthrower Controls
A | Auger | Engages auger when pulled |
| Control | back, and disengages auger |
|
| when released. |
|
|
|
B | Chute | Rotates discharge chute to |
| Direction | desired direction. |
| Control |
|
|
|
|
C | Chute | Controls vertical angle snow is |
| Deflector | thrown. |
|
|
|
10
