Simplicity 2600, 1600 manual Coat all threads with, teflon sealant, Front RH, Hole, Rear RH

Engine & Electric Clutch Group - 17HP Briggs & Stratton

NOTE: Unless noted otherwise, 985718

use the standard hardware torque specification chart.

NOTE: Torque to

9 - 13 ft. lbs.

29

36 37

35

32	33	34
		32

Heat to 100˚ F	4
for installation.

1	2	3
	Coat all threads with
	teflon sealant.	5

Torque to

35 - 45 in. lbs.

6

8	7
	6

			Front RH
			Hole.	21
				13
	29	31		Rear RH	11
	28
				Hole
		30	29	12
25	28				10
				20
					14

27	15
26

NOTE: Apply anti-seize compound to crankshaft before installing pulley.

12 NOTE: Torque the four

913 engine mounting bolts

to 28 - 34 ft. lbs.

		Note:
	Ref. No. 38 can	Orentation
	be used to replace	of All Keys
	both Ref. Nos. 9.
38	Ref. No. 14 must be
	removed to do this.

916

				Install in dash
				CHOKE hole.
		Align slot in		39
	24	clutch with anchor	17
23		pin on frame.
		18		Tie clutch wire to
		22	19	clutch away from
				belt & pully.

Prevent hex washer (17) from turning

and torque capscrew (19) to 45 - 50 ft. lbs.

The above parts group applies to the following Mfg. Nos.:

1693694	Broadmoor 17HP Hydro	1693698	2617HC 17HP Hydro
1693696	1617HC 17HP Hydro	1693700	12617HC 7HP Hydro

© Copyright 2001 Simplicity Manufacturing, Inc. All Rights Reserved. 6 TP 400-2324-01-BM-SMA