1692876 413RT, 3.5HPRear Tine Tiller
1692877 516RT, 5HPRear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
14
TP-400-2033-00-RT-S
©Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
DecalsA-RT42019A
FORWARD - PULL DOWN ONDRIVE CONTROL LEVERSTO ENGAGE WHEELS AND TINESFORWARD - PULL DOWN ONDRIVE CONTROL LEVERSTO ENGAGE WHEELS AND TINESPULL FOR REVERSEAVOID SERIOUS INJURY
• Read operator's manual(s) before operating.
• Know the location and function of all controls.
• Keep all shields and guards in place and
working while running.
• Never allow children to operate tiller.
• Dress appropriately — wear sturdy footwear.
• Carefully inspect area to be tilled — remove
large rocks and other foreign objects.
• Do NOT till above underground electric, water,
gas, or other utility lines and pipes.
• STOP THE ENGINE AND DISCONNECT THE
SPARK PLUG WIRE before removing debris
or servicing unit.
• When leaving the operating position
for any reason:
— shut off the engine
— wait for all moving parts to stop
WARNING WHEELS ACT AS BRAKES
• Never start or operate tiller with wheels in the
Free-Wheel position. Make sure wheel lockouts
are engaged through wheel hubs and axle.
• Wheels act as brakes to keep the tiller at a
controlled speed. Disengage wheel lockouts
ONLY when engine is stopped.
REFER TO OPERATORS MANUAL
FOR DETAILED OPERATING INSTRUCTIONS
TO START:1. Release drive control levers to neutral position.
2. Lower the drag stake so that tines do not touch
the ground.
3. Check position of wheels and wheel lockouts.
4. Slide choke control to choke position.
5. Move throttle control lever to fast position.
6. Pull starter rope.
WARNING
OPERATION
DANGERAVOID INJURY FROMROTATING TINES!Keep hands, feet,and clothing away.• Tines rotate when tiller is
engaged in forward or reverse.
• Tines and wheels rotate when
drive control levers are pulled
down.
• In reverse, tines and wheels
rotate when the reverse handle
is pulled back toward the
operator.
• Releasing the drive control
levers to neutral stops the
wheels and tines.
DO NOT START ENGINE UNLESS BELTCOVER IS ATTACHED. KEEP HANDS, FEET,AND CLOTHING AWAY FROM MOVINGBELTS AND PULLEYS. FAILURE TO COMPLYCOULD RESULT IN INJURY. SEE OWNER'SMANUAL FOR FULL SAFETY INSTRUCTIONS.