Engine Mount, Belts & Wheels Group
REF NO. | PART NO. | QTY. | DESCRIPTION |
1 | 1722157 | 1 | BRACKET, Engine |
2 | 1722164 | 1 | SPACER, Engine |
3 | 1722158 | 1 | PULLEY, Engine 2 Groove |
4 | 1716770 | 1 | WASHER |
5 | 1917356 | 1 | LOCKWASHER, Spring 5/16” |
6 | 1921515 | 1 | CAPSCREW, Hex Head 5/16” - 24 x 3/4” G5 |
7 | 905850 | 1 | KEY, PARALLEL PLN 3/16” x 3/16 x |
8 | 1960345 | 1 | CAPSCREW, Hex Head 3/8” - 24 x 2” G5 |
9 | 1716728 | 2 | YOKE, Cable |
10 | 1722159 | 1 | ARM, Pivot |
11 | 1716702 | 2 | PIN, Link Forward/Reverse |
12 | 1722162 | 1 | GUIDE, Belt Reverse |
13 | 1924940 | 4 | WASHER, 3/8” |
14 | 1722167 | 1 | PULLEY, Idler Reverse |
15 | 1916950 | 2 | NUT, Hex 3/8” - 16NC, 2B |
16 | 1716703 | 2 | PIN, Cotter |
17 | 1716760 | 1 | BOLT, Hex Head 5/16” - 24 x |
18 | 1722160 | 1 | PIVOT |
19 | 1960044 | 3 | WASHER, 5/16” |
20 | 1716766 | 1 | |
21 | 1716802 | 2 | SPRING, Idler Arm |
22 | 1935048 | 3 | NUT, Hex Flange 5/16” - 18 Two, Way Lock GA |
23 | 1716780 | 3 | BOLT, Hex Flange Head 5/16” - 18 x 3/4” |
24 | 1722161 | 1 | GUIDE, Belt Forward |
25 | 1722165 | 1 | COVER, Belt |
26 | 1722163 | 1 | PULLEY, Transmission 2 Groove |
27 | 1716772 | 1 | WHEEL & TIRE ASSEMBLY TILLER, Left |
28 | 1716774 | 1 | WHEEL & TIRE ASSEMBLY TILLER, Right |
29 | 1722332 | 2 | PIN, Lock |
30 | 1716803 | 1 | PULLEY, Forward Idler |
31 | 1722166 | 1 | ARM, Idler Forward |
32 | 1722168 | 1 | SCREW, Hex Socket Shoulder 5/16” - 18 x 3/8” |
33 | 1925690 | 1 | CAPSCREW, Hex Head 5/16” - 18 x |
34 | 1722144 | 1 | |
35 | 1922127 | 4 | CAPSCREW, Hex Head 5/16” - 18 x |
36 | * | 1 | ENGINE, 5.5HP B&S INTEK - Engine Model 110412, Engine Type |
37** | 1721528 | 1 | BUMPER, Guard |
Footnotes:
*See your local Briggs & Straton distributor for Parts & Service.
**The bumper quard is not standard with the 5.5HP tiller, but it is an available option, order the bumper guard (Ref# 37), 4 nuts (Ref# 22) and 4 capscrews (Ref# 35).
The above parts group applies to the following Mfg. Nos.:
1693847 5516RT, 5.5HP Rear Tine Tiller
7 |
