Adjustments

AUGER DRIVE ADJUSTMENT

WARNING

Do not over-tighten, as this may lift the lever and cause auger drive to be engaged without depressing the Auger Control.

1.Check that the auger cable (A, Figure 15) is on top of cable button (B) as show in Figure 15.

2.With the drive lever released, the hook (B, Figure 16b) should barely touch the lever (C) without raising it. There can be a maximum 1/32” clearance as shown.

3.To adjust, loosen nut (D) by holding the adjusting flats (A) and turning nut (D). Turn adjustment flats and hold screw. The adjustment screw is a phillips screw and the head can be held or turned by insert- ing a screwdriver through the spring (F).

4.Hold adjusting flats (A) and tighten nut (D).

5.Start unit and check auger. Auger must not be engaged unless auger control is depressed.

6.With engine running, fully depress auger control, the auger should engage and run normally.

7.Release auger control. Auger must stop within 5 seconds.

8.If auger does not operate properly, stop engine and recheck drive linkage adjustments.

9.If auger linkage is properly adjusted, auger drive belt tension may require adjustment. See adjusting the auger belt in this section of the manual

TRACTION DRIVE CABLE

ADJUSTMENT

Initial Adjustment

WARNING

Do not over-tighten, as this may cause traction drive to engage without depressing the traction drive control (arm must remain in down position).

Verify that the cables are not over-tightened: With speed selector in position 1 and traction drive control fully released, push snowthrower forward. The unit should move forward freely.

If unit does not move forward freely, the cable has been over-tightened. To remedy, loosen tension on clutch cable slightly, and recheck.

C

B

A

Figure 15. Auger Cable Button

A.Auger Drive Cable

B.Auger Cable Button

C.Lever

A

D

E

F

1/32” (.080cm)

C B

Figure 16. Auger Drive Adjustment

A.Adjusting Flats

B.Spring Hook

C.Lever

D.Nut

E.Adjustment Screw

F.Spring

1.With the drive lever released there should be no slack in the cable when moved slightly from side to side.

2.To adjust tension on the cable slide the cable boot (A, Figure 17) off the cable adjustment bracket (D).

3.Remove the “Z” hook (C) from the cable adjustment bracket (D) to a different adjustment hole. The cable should have no slack. The cable should have no ten- sion or load.

24

Page 26 Page 28
Page 27
Image 27
Simplicity 95288E, L9528EX, L8526E Adjustments, Auger Drive Adjustment, Traction Drive Cable Adjustment, Initial Adjustment
Page 26 Page 28

E115328E, L11532E, L10530EX, E95288E, 105308E specifications

The Simplicity L8526EX, L9528EX, 115328E, L9528E, and 95288E represent a line of advanced lawn mowers designed to combine efficiency with user-friendly features. Each model is tailored to meet diverse mowing needs, making them ideal for both residential and commercial applications.

The Simplicity L8526EX is renowned for its robust construction and exceptional cutting power. It features a powerful engine that ensures consistent performance even in challenging mowing conditions. One of its standout characteristics is the unique Mow More technology, which allows for smooth maneuverability and precise cutting, making it suitable for complex lawns with varying terrain. Additionally, its adjustable cutting heights provide flexibility, allowing users to select the perfect length for their grass.

The L9528EX is a versatile model designed for larger properties. It boasts a wider cutting deck, optimizing mowing time while reducing the number of passes required. The engine delivers high torque and speed, ensuring that grass is cut quickly and efficiently. This model also incorporates a sophisticated bagging system that efficiently collects clippings, preventing them from littering the lawn and providing a cleaner cut.

The 115328E model stands out for its ergonomic design and user-friendly controls. It features an innovative handle system that reduces vibration, enhancing comfort during prolonged use. Its easy-start technology ensures that users can get the mower running with minimal effort. With a robust frame and enhanced stability features, this model is built to last while offering superior cutting performance.

The L9528E model combines economy with high performance. It is lightweight yet durable, allowing for easy operation without compromising on power. The advanced mulching capability of this mower breaks down clippings finely, returning valuable nutrients back to the soil. This not only improves the health of the lawn but also minimizes the environmental impact.

Lastly, the 95288E is equipped with cutting-edge technologies for an ultimate mowing experience. It includes a digital display that provides real-time information on battery life and performance status. The easy-adjust mowing height system allows users to make quick adjustments on-the-fly. Additionally, it features a quiet operation mode ideal for residential areas, ensuring minimal disruption.

In summary, the Simplicity L8526EX, L9528EX, 115328E, L9528E, and 95288E showcase a commitment to quality, performance, and user satisfaction. Each model incorporates innovative features and technology that cater to a range of mowing requirements, making them valuable additions to any lawn care routine.
Top Page Image Contents