Decals - Safety & Operation
NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
1
2
3
4
6
7
OPERATION
8
1
15, 16
4
5
6
7
8
9
To Start Engine:
Seat must be occupied, PTO Switch OFF, Parking Brake ON and both control handles are locked in Neutral.
To Stop Engine:
Engage Parking Brake, Throttle at half to full, turn Ignition Switch Off.
Before Leaving Machine:
Turn PTO switch off, shut off engine, remove key, and set Parking Brake
GROUND SPEED AND
STEERING LEVERS
Right lever controls speed and direction of right drive wheel. Notch is neutral
lock.
Left lever controls speed and direction of left drive wheel. Notch is neutral lock.
Steer by slowing the lever in the direction of the turn.
PARKING BRAKE
LEVER
Pull to set Parking Brake.
Push to release Parking
Brake.
DECK LIFT PEDAL
Push to raise deck.
CUTTING HEIGHT
ADJUSTMENT PIN
To Operate PTO Clutch:
Operator must be in seat.
Pull up to Engage.
Push down to Disengage.
When Operator Leaves Seat:
Engine will shut off if PTO is on. Engine will shut off of Parking Brake is off.
Engine will shut off if both control levers are not locked in neutral.
47138
DO NOT TOW!
Damage may result to
Hydrostatic Transmission.
14
8
2
15, 16
3
10
11
12
13
14
15
WARNING |
BEWARE OF |
POWER DRIVEN PARTS |
Key | Charge | PTO |
|
Switch | Circuit | Clutch | Auxiliary |
20A | 20A | 20A | 20A |
46503
48" 52"
NOTE: Decals are NOT shown to scale.
16
The above parts group applies to the following Model Nos.: |
|
| ||
ZT2148 | Colt 21 HP Briggs & Stratton Rider w/ 48” Mower |
| ||
ZT2148B | Colt 21 HP Briggs & Stratton Rider w/ 48” Mower |
| ||
ZT2148K | Colt 21 | HP Kohler Rider w/ 48” Mower |
| |
ZT2352 | Colt 23 | HP Briggs & Stratton Rider w/ 52” Mower |
| |
ZT2352B | Colt 23 | HP Briggs & Stratton Rider w/ 52” Mower |
| |
ZT2352K | Colt 23 | HP Kohler Rider w/ 52” Mower |
| |
© Copyright 2003 Ferris Industries. All Rights Reserved. | 48 | TP | ||
