- Put the handle (2) in working position with the big, right lever (1). We
recommend positioning the handgrip in the height of the
user’s hip. - Lift the handle slightly, to make sure the machine stands horizontally.
- Move the left or right safety lock (3) located onto the grip inwards.
- Switch on the machine with the respective lever (4).
After switching on the machine, the handle will move shortly to the right.
The direction in which the machine moves, is controlled by lifting or lowering the
grip. The more you lift or lower the grip, the faster the machine runs to the
corresponding direction.
- lifting the grip: machine runs to the right
- lowering the grip: Machine runs to the left
Lever (4) can only be actuated, if the handle is not in vertical position. This is a
safety feature! The user cannot control the machine with vertical handle.
If you feel unsafe or cannot control the machine just release lever (4). The machine
will stop at once. If you have carried out some training, you will be able to operate
the machine with one hand.
Always remove discs or brushes after work. Remove also the cleaning tank, if one
has been used. Always disconnect the power cord after work or when leaving the
machine.
Operation with vacuum cleaner
Note: the vacuum cleaner cannot – on technical grounds – remove the grinding dust
from under the discs. It will always remove the fine dust. To clean the floor, use an
industrial cylinder vacuum cleaner.
6