3.2
Oil Reservoir Installation
The oil reservoir should rest on the four corners of the machine table groove.
Two rubber seats ‘1’ for supporting the head portion on the operator side ‘A’ are fixed on the extended
portion of the table by using nail ‘2’, and the other two rubber cushion ‘3’ on the hinge side ‘B’ are attached by nail too. Then, the oil reservoir ‘4’ is placed (Figures 2 and 3).
23.5mm | 19.5mm |
Figure 2Figure 3
Two hinges ‘1’ fit into the hole in the | to the cushions ‘3’ on the four cor- |
machine bed, and the machine head | ners of the table (Figures 4 and 5). |
fitted the table hinge’s rubber ‘2’, |
|
before the machine head is placed |
|
Figure 4 | Figure 5 |
High Speed Straight Lockstitch Sewing Machine Instruction Manual and Parts List 6