Singer 10, 5, 6, 8 - page 34

5, 6, 8, 10 Stitch Sewing Machines
Lace insertion
Lace is inserted after fabric is cut, but before it is sewn
together.
Recommended Settings
Stitch Selection "M" Stitch
Needle Position:
Stitch Width:
Stitch Length: 1/2-2
Foot: Special Purpose (J)
Needle Plate: General Purpose (A)
* Cut lace to desired size.
* Position lace on right side of fabric and pin in place.
* Place the work under the presser foot so that the
stitches fall over the lace edges. as shown.
* After both sides of lace are sewn, turn fabric over to
the back side and cut the fabric on both sides close to
the stitching lines and remove.
34