Sioux Tools 5978 manual Model

Model 5978

Form # Z568 Date 9-59/A

Operator Instructions Important

Includes - Foreseen Use, Work Stations, Putting Into Service,

Operating, Dismantling,Assembly and Safety Rules.

ManufacturerlSupplier

Sioux Tools Inc.

2901 Floyd Boulevard

P.O. Box 507

Sioux City, IA 51102

U.S.A.

Tel No. 712-252-0525Fax No. 712-252-4267

Read these instructionscarefully beforeInstalling, operating,

servicingor repairingthis tool. Keepthese Instructions in asafe

... .

accessible place.

Product Type

118" (3 rnrn) Pencil	54,000
	Sycles Per Min.
Air Die Grinder
Model No/Nos	Serial
	-No.

Recommended Hose Bore	Recommended Max.
Size - Minimum	Hose Length
114 Ins 8 M f M	30 Ft	10 M

Air Pressure
RecommendedWorking	6.2	bar	90	PSI
Maximum	6.2	bar	90	PSI

U s e - Safely lasses YES

U s e 'Safety- Boots

U s e - Breathing Masks YES

U s e -Ear Protectors YES

Always Wear Safety

@Wear HearingProtection

AEpE3tposure

Safety rules when using a 5978		-Always when using the tool, adopt a firmfooting and/or
DieGrinder		position and grip the tool sufficiently only to overcome
-Use accessories rated at least 54,000 RPM.		any reactionforces that may result from the tool doing
		work. Do not overgrip.
-Prolonged exposure to vibration may cause injury.
		-Use only correct spare parts for maintenance and
-Read all instructions before using this tool. All
		repair. Do not improvise or make temporary repairs.
operators must be fully trained in its use and aware of
		Major servicingand repairs should only be carried out
these safety rules.
		by persons trained to do so.
-Do not exceed the maximum working air pressure.
		-Do not lock, tape, wire, etc. the 'OnIOff'valve in 'On'
-Use personal protection equipment as recommended.
		position.
-Use only compressed air at the recommended
		-Always shut off the air supply to the tooland open the
conditions.
		air regulator to exhaust the air from the feed hose
-If the tool appears to malfunction, remove from use
		before fitting, removing or adjusting the working
immediately and arrange for service and repair. It it Is
		attachment fitted to the tool.
not practical 10 remove tool from service, then shut off
		- Before using thetool, make sure that a shut off device
the air supply to the tool and write or
have written a warning note and ,			-
attach it to the tool.		Take Air FromTop
-If tool is to be used with a balancer or				*
other suspensiondevice, ensure that			L& Spot To
the tool i s firmly attached to the	with SuffichlCapacity		TrapWater
suspension/support device.
	To Maintain ~ecomhended
-When operatingthe tool, always keep	Working PressureA>
the body and particularly the hands	EachToolOutlet	EasyTo Reach And Air Toot
away from the working attachment
fixed to the tool.
-The tool is not electrically insulated.
Never use the tool if there is any		Filter Lubricator
chance of coming into contact with
	~ecommendedAir Supply System
live electricity.				Figure 1

Page No 1