Sipura Technology SPA-1001 manual Getting Started, Setting up the hardware

Section 1 – Getting Started

When you receive your SPA-1001 it should contains the following items:

1.SPA-1001

2.Power supply

3.Phone cable

4.Network cable

5.Quickstart guide

Setting up the hardware:

Step 1: Connect the power cable to your SPA-1001

Step 2: Connect the network cable from your SPA-1001 to your DHCP enabled modem/router

Step 3: Connect an analogue phone to the “Phone” port in the SPA-1001.

Step 4: Turn the power on

Step 5: Pick up the phone and dial **** (You should hear a voice saying Sipura Configuration Menu)

Step 6: Dial 110# (Write down the IP address that is returned) (See Appendix E for all phone menu options)

At this stage, you can choose whether to upgrade the firmware. The latest version of the SPA-1001 firmware at the time of writing this document is

To upgrade the firmware see Appendix C.