the lower two holes, as the range
hood will cover these holes once
hung on the Support Bracket (“S”).
Chimney Installation
Locate the bracket (item Y) and
position it with the vertical axis
(marked on the wall earlier) running
through the midpoint of bracket “Y”.
This bracket fits onto the ceiling and
onto the wall to secure the upper
half of the decorative chimney in
place.
Mark the wall for the two anchors
and mark the ceiling for the two
anchors as indicated in Figure 2,
(page 2).
Fix brack et “Y” to the wall and
ceiling.
Hanging the Range Hood
Prepa re the rang e h ood for
installation. Remove all filters to
ensure they do not get damaged
during the installation process. Hang
the range hood on the bracket “S”
(refer to Figure 4).
These screws are also used to make
minor adjustments to the levelling of
the range hood. Ensure the hood is
level. Locate the two holes “C”
inside the housing of the range hood
and secure the range hood to the
wall once the range hood is perfectly
level and vertical. (refer to Figure 6)
Figure 5
Figure 4 Figure 6
4
The bracket fixed onto the back of
the range hood will drop into the
channel on the top of bracket “S” on
the wall. Ensure the hood is securely
engaged into the support bracket -
the range hood must clip in behind
the extended lip on the Support
Bracket (“S”).
“Lock” the range hood onto the “S”
bracket using the four machine
screws supplied (refer to Figure 5).