Sirius Satellite Radio RB4 4.6 Switching the unit ON / OFF, 4.7 Audio Settings

Daimler Chrysler	Filename:	RB4UserManualUSV1.0.doc	Page:	15/86
	Document Title: RB4 User Manual		Date:	5/16/2003
Harman/Becker	Project:	6807 - RB4	Status:	Version 1.0
Automotive Systems	Author:	Michael Soldwisch	Print:	5

4.6 Switching the unit ON / OFF

Power to operate the navigation radio is supplied through the ignition switch. It must be in the ON or ACC position to operate the navigation radio.

The radio is switched ON and OFF with the ignition switch. It is also possible to set the unit in standby mode during driving by pressing the ON / OFF / VOL rotary knob.

Note: If the ignition is switched off with the radio in standby mode, the radio memorizes the standby state if the ignition is switched on again. Press the ON / OFF / VOL rotary knob to switch the radio on.

The navigation software is always working when the ignition is switched on, even if the radio is in standby mode.

It is possible to eject the CD and to display the time if the unit is switched off.

4.7 Audio Settings

4.7.1Audio Volume

Increase or decrease volume by turning the VOL knob.

Note: Changes take effect only for the displayed Audio Source

0407.0100.01

The volume level can be seen on the display while changing the volume.

There are different volume levels for audio programs, optional hands free phone, and navigation announcements.

Note: Set the navigation announcement volume by turning the VOL knob while a navigation announcement is playing. Also change the navigation announcement settings by initiating an announcement by pressing the RPT button (repeat) and adjusting the volume knob while the navigation announcement is repeating. The hands free phone volume can be changed, when the radio is in HFM mode.

4.7.2Activate Sound Menu

Select the FM Options Menu by pressing the OPT button while in FM Mode.

Sound Settings

0407.0200.01

Press the AUDIO multifunction button to access the Audio Settings Menu.