Sirius Satellite Radio SCC1C manual Installing the Antenna, To attach the cover/tail

Installing the Antenna

The antenna includes a 2-3/4” cable cover/tail which covers the exposed antenna cable and keeps it attached securely to vehicle roof. The tail also helps position the antenna the proper distance from the window, sunroof or rear hatch.

To attach the cover/tail:

1.Turn the antenna upside-down and extend the cable.

2.Connect the cover/tail to the antenna cable, making sure that the strain-relief on the antenna seats into the cover/tail groove.

3.Route the cable through the wire channel in the cover/tail. (Figure 6)

4.Once you have determined the proper mounting location (see next section), clean the area with the supplied alcohol pad.

5.Remove the remaining protective tape from the adhesive, carefully position the antenna and apply pressure to secure to the vehicle. (Figure 7)

Adhesive

Strips

Antenna

Cover/Tail

Figure 6 Figure 7

12 [ Installation ]