Getting Started
Installation & Setup
Introduction
The SIRIUS Home Satellite Radio Tuner must be connected to the windowsill antenna (supplied) to process the SIRIUS signal. The Tuner recognizes and decodes the incoming SIRIUS program information and provides an audio signal to your stereo receiving equipment or other audio output equipment.
Installing Your SIRIUS Tuner
You can begin to enjoy SIRIUS Satellite Radio as soon as the Tuner installation is complete and you have initiated your SIRIUS Satellite Radio subscription. To set up your Tuner, using the following installation instructions.
Installation/Wiring Precautions
Make sure the power cable is not connected to an AC wall outlet until all interconnections have been made and verified. The power cable should be connected last.
Do not install the Tuner in the locations exposed to direct sunlight or in areas subject to extreme temperatures.
Incorrect installation may cause damage to the system. During antenna placement/installation, refer to the Antenna Placement procedure on page 15.
Cabling Interconnections
Set up your system using the diagram and by following the installation instructions, or enlist the help of a professional installer.
Installing/Positioning the Antenna
For best reception, the supplied antenna should be placed near a win- dow; some repositioning may be required to achieve optimum results.
GETTING STARTED
13