Step 1. Install clamping blocks into the holes in the workbench
(Fig. 6).
Step 2. Turn both clamping handles counter-clockwise until they stop,
then push clamping jaw back as far as it will go (Fig. 7).
Step 3. For additional workpiece support, fold out the clamping
arms (Fig. 8).
Step 4. Hold the workpiece with one hand between the jaws and
lay it down on the clamping arms (Fig. 9).
Step 5. Pull adjustable clamping jaw with the other hand toward
the workpiece and fixed clamping jaw (Fig. 10).
Step 6. Tighten both clamping handles 1/2 turn clockwise to lock
into place. To release, turn handles 1/2 turn counter-clockwise
(Fig. 11).
9.
Operating Instructions
A
A
b
A
A
A
b
E
C
C
Fig. 8
Fig. 7
Fig. 9
Fig. 10
Fig. 11
Fig. 6