Skil Games manual Instructions, Ring Toss Game, Step-By-Step Project Plans

Ring Toss Game

Recommended for families with children ages 8-10

STEP-BY-STEP PROJECT PLANS

INSTRUCTIONS:

1Cut pine into two 16” long stripsand four 7-1/4” long strips.

2Cut five 5” lengths of the dowel.

3 Using diagram at right, set up the pieces of the base on your workbench.

4Measure and mark where the 10 screws will be used to fasten all pieces together,using the diagram at right for placement.Add a thin strip of wood glue between each section, realign pieces, clamp down securely

and then fasten together using drywall screws.You now have the X-shaped base of the game.

5Sanding: Round off each of the four arms of your base using a sander. Then clamp down each dowel and round off one edge of each piece, making it smooth.

6Measure and mark for holes 1-1/2” in from the tip of each arm, and an additional hole centered where the arms come together.

With a 3/4” forstner bit in the chuck, set the depth of your drill press to drill a maximum of 3/4 of the way down into the material.

Then drill all five holes.

7-1/4"1

16"

3/4" x 5" (x5)

2

	2-1/2"
	5-1/2"	2-1/2"	4
	5-1/2"
3	7-1/4"
	8-1/2"	5-1/2"
	5-1/2"		2-1/2"

2-1/2"

5

6

1-1/2"

2