There are 3 different operating modes for the Household Alert@ Long Range Receiver.

1)Alert - Beeps when a sensor is activated, corresponding zone LED will also flash.

2)Alarm - Sounds an alarm when a sensor is activated, corresponding zone LED will also flash.

3)Off - No audio sound will be emitted when sensor is activated. Zone LED will flash to indicate the activated sensor.

To select the operating mode, place the

slide switch on the side at the desired setting:

OFF - No Audio

ALERT - Alert Mode

ALARM - Alarm Mode

Operation

Alert

When motion is detected in the monitored area, the sensor will send a signal to the receiver. lt will beep and the corresponding zone red LED

will flash for 15 seconds.

lf the sensor is set to zone 1, zone 1 red LED on the receiver will flash, and the receiver will emit a continuous "single beep", i.e. "beep" pause, "beep", pause..... etc.

lf the sensor is set to zone 4, zone 4 red LED will flash, and the receiver will emit a continuous "4 beeps", i.e. "beep beep beep beep" pause "beep beep beep beep" pause ......etc.

By the number of beeps emitted by the receiver, user can identify which

zone is triggered.

Mute

When a sensor is triggered for a long period of time, you may stop the buzzer by pressing the mute button. When another signal comes again. you can disable lhe buzzer for all currently activated sensors by pressing

the mute button. The receive will beep again if it receives another signal.

For instance, if you are working in your garage, you may want to disable the buzzer for this garage only. Then you can press the "Mute" button after it starts to sound. lf any other sensor is triggered, the receiver will sound again.

Alarm

When the receiver is in Alarm operation mode, it will sound its siren when a sensor is activated. The maximum alarm duration is set for 3 minutes. To terminate the siren during the 3-mininterval, press the mute button. Although the alarm siren is terminated, if that sensor is still activated, its corresponding LED will continue to flash.

Note: This audio siren is not intended to prevent intruder break-in, it is rather an alert signal indicating a sensor is activated. Therefore, turning off the siren does not require specific password.

The Household Alert@ Long Range Receiver can work with up to 4 different sensors: garage door monitor sensor, door / window sensor, water sensor, indoor/outdoor motion sensor, etc. Please visit www.skylinkhome.com or contact us at support@skylinkhome.com for more information of how to fully utilize your lndoor/Outdoor Motion Sensor.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. lf this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-lncrease the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radioffV technician for help.

lf, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.

lf you would like to order Skylink'sproducts or have difficulty getting them to work or download information and user manual, please :

1.visit our FAQ section at www.skylinkhome.com, or

2.email us at support@skylinkhome.com, or

3.call ourtollfree at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. Fax (800) 286-1320

off

No audio will be emitted even sensor is activated. Only zone LED will flash.

When the battery level on the sensor drops to a certain level, or the sensor is out of the operating range, the receiver will show a "loss of signal" indication. The red LED representing that zone will flash rapidly, i.e. if zone 1 sensor is lost, the zone 1 red LED will flash rapidly.

When the loss of signal indication occurs, move the receiver closer to the corresponding sensor and trigger that sensor. lf the red LED stops flash- ing rapidly, that means the receiver or sensor needs to be relocated. lf the "loss of signal" indication persists, replace the battery of that sensor.

CUSTOMER SERVICE

17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3

Email :support @ skylinkhome.com

http;//www.skyl i n khome. com P/N.1Un54

O2O1O SKYLINK GROUP

Page 1 Page 2
Page 2
Image 2
SkyLink HA-434TL manual Operation, Alert Alert Mode Alarm Alarm Mode, Customer Service
Page 1 Page 2

HA-434TL specifications

The SkyLink HA-434TL is a sophisticated home automation system designed for ease of use and enhanced security. It operates on a reliable radio frequency of 433 MHz, allowing seamless communication between various devices within the system. This feature makes it particularly appealing for homeowners looking to create a comprehensive smart home environment.

One of the key features of the HA-434TL is its user-friendly design. Setting up the device is straightforward, requiring minimal technical skills. The system is compatible with a wide range of SkyLink sensors and accessories, including door/window sensors, motion detectors, and remote controls. This flexibility allows users to customize their home security and automation according to their specific needs.

The HA-434TL boasts advanced wireless technology that ensures a stable and secure connection. With a transmission range of up to 500 feet, users can control their devices from various locations within their homes without concern for signal disruption. This capability is beneficial for larger houses or multi-story buildings, where distance can often lead to connectivity issues.

Another impressive characteristic of the SkyLink HA-434TL is its expandability. Users can easily integrate additional sensors and modules into their existing setup, allowing for the expansion of their home automation system as their needs evolve. The system can support multiple zones, enabling effective monitoring and management of different areas within a property.

In terms of security, the HA-434TL utilizes a rolling code technology that enhances protection against unauthorized access. This ensures that each signal sent from a device is unique, significantly reducing the risk of interception by potential intruders. Additionally, the system provides alerts and notifications for unusual activity, allowing homeowners to take immediate action when necessary.

Moreover, the SkyLink HA-434TL comes with an intuitive mobile app, enabling remote access and control over the entire system. Users can receive real-time updates, adjust settings, and monitor their home environment from anywhere, whether at work or on vacation.

In conclusion, the SkyLink HA-434TL is an exemplary home automation system that combines advanced technology with user-centric features. Its reliable performance, extensive compatibility, and enhanced security measures make it an ideal choice for homeowners looking to elevate their living experience through smart technology. With the ability to easily expand and customize the system, the HA-434TL ensures that users can enjoy peace of mind and convenience in managing their home.
Top Page Image Contents