Indications for Use
The Model 300P and/or 600P Liquid Oxygen Portable will provide a source of supplemental oxygen for ambulatory home healthcare patients, by vaporizing medical grade liquid oxygen and then dispensing it to the patient via an integral electronic conserving device. The Model 300P and/or 600P Liquid Oxygen Portable is neither a
Provider Checklist
Before leaving the VIAspire Liquid Oxygen Portable with a patient, the following checklist MUST be completed:
£Check all parts for shipping damage. In case of damage, do not use. Contact Inspired Technologies, Inc. for further instructions.
£Make sure the VIAspire Liquid Oxygen Portable is com- patible with the liquid oxygen source. Use a liquid oxygen reservoir with a compatible coupler.
£Instruct the patient on the safe operation of the VIAspire Liquid Oxygen Portable and all associated accessories, and review ALL warnings.
£Leave a copy of this instruction guide with the patient.
6 | VIAspire Oxygen Portable Manual |
VIAspire Portable Overview
The illustration shows the parts of the VIAspire Portable.
Flow Rate | Oxygen Outlet |
Selector Knob | Connector |
LED Battery | Continuous Flow/ |
SmartDose Switch | |
Indicator |
|
| Contents Indicator |
| Batteries (4 AA cells) |
Fill Valve | ALKALINE ONLY |
LOX Fill Coupler 
Filling a VIAspire Portable 300 or 600
After the VIAspire Liquefier has liquefied enough oxygen, you can fill your portable by following these instructions.
WARNING If the Liquid Oxygen Coupler Access Door on top of the VIAspire Liquefier is opened and the unit continues to run, do not fill the portable. Contact your medical equipment provider to service the equipment.
CAUTION The VIAspire Portable is designed to accept 93% pure liquid oxygen from the VIAspire Liquefier. Most oxygen portables are not compatible. Attempting to use an incompatible portable device may damage the VIAspire Portable or Liquefier, or could lead to injury.
VIAspire Oxygen Portable Manual | 7 |
