99-00864-20 D0 Setting Up and Turning On the Document Camera 9
1. Set the left Output DIP switch on the rear panel of the document camera to Video.
2. Set the right Output DIP switch on the rear panel of the document camera to PAL.
3. Connect the video cable with the RCA plug to the VIDEO OUT receptacle on the rear
panel of the document camera.
4. Connect the other end of the video cable to the television display.
5. Connect the AC adapter to the DC IN 12V receptacle on the rear panel of the
document camera.
6. Connect the other end of the AC adapter to a power outlet.
Turning On the Document CameraNOTE: When you connect the document camera to the computer using a USB cable for the
first time, and then turn on the document camera, the document camera automatically installs
the necessary drivers on the computer.
Press the Power button on the document camera control panel.
Installing SMART Notebook SoftwareNOTE: The document camera works with the latest version of SMART Notebook. For more
information on upgrading SMART software, see http://www2.smarttech.com/st/en-US/Support/
Downloads/default.htm.
Insert the SMART Notebook CD into your computer’s CD drive to launch the software
installation screen, and then follow the on-screen instructions.
Using the On-Screen Display MenuYou can use the on-screen display menu in Camera mode to customize the behavior of the
document camera. You can view and control the on-screen display menu using the document
camera control panel.
1. Press the Camera button on the document camera control panel to switch to
Camera mode.
2. Press the Menu button to view the on-screen display menu.
3. Press the up and down arrow buttons to select a menu item.
4. Press the right arrow button to display a menu item’s submenu.
To connect the document camera to a PAL system television display
CAUTION
Do not change the DIP switch setting when the document camera is
turned on.