SECURE THE COLLECTORSWITH STRAPS PROVIDED
Cut the strap provided into the proper lengths to span the
collectors vertically. It may help to touch a flame to the
ends of the strap after cutting to prevent fraying. Start by
tying the strap to the top of the bracket and run the strap
through the bracket below it and tie to the bottom bracket.
When completed, you will have five verticle straps running
across each collector. Do not add additional mounting
hardware - the collector must “float” on the brackets to
expand and contract.
CONNECT PIPETO COLLECTORS
Slip the connector hoses onto the shoulder groove and
insert the grey pipe adapter into the other end of the
hose as shown at the right.
Glue your fittings or PVC pipe directly onto the grey pipe
adapter and run your piping down to the filter area.
When gluing PVC pipe, always clean parts to be glued.
Apply primer to both ends and then swath the ends with
PVC glue. Insert pipe into the fittings and twist a quarter
turn to get a good melt.
3
4
6