AR-B1462 User¡¦s Guide

7-9

7.9.2 Exit Without Saving
When you select this option, the following message will appear at the center of the screen to help to Abandon all
Data and Exit Setup.
Quit without saving (Y/N) ?
7.10 BIOS UPDATE
The BIOS program instructions are contained within computer chips called FLASH ROMs that are located on your
system board. The chips can be electronically reprogrammed, allowing you to upgrade your BIOS firmware
without removing and installing chips.
The AR-B1462 BIOS provides a menu-based interface to the console subsystem. The console subsystem
contains special software, called firmware that interacts directly with the hardware components and facilitates
interaction between the system hardware and the operating system.
The AR-B1462 provides FLASH BIOS update function for you to easily upgrade newer BIOS version. Please
follow the operating steps for updating new BIOS:
Step 1: Insert the FLASH BIOS diskette into the floppy disk drive.
Step 2: Turn on your system and press [Ctrl]+[Home[ (Hit the [Ctrl] key and [Home] key simultaneously just
powered on. Then the onboard BIOS will read new BIOS file named and AMIBOOT.ROM from
floppy drive and write to FLASH.
Step 3: If all steps is correctly, the system will reboot. But the system did not boot up, please check
everything and try again. If still not work, please contact your Acrosser distributor for technology
supports at once.
NOTE: 1. After turn on the computer and the system didn’t detect the boot procedure, please press the
[Ctrl]+[Home] key immediately. The system will detect the BIOS file from floppy drive.
2. The BIOS Flash disk is not the standard accessory. It supports to add some functions, if it is
necessary to update in the future. User can download the suitable BIOS. The address is as
follows: http:\\www.acrosser.com