AR-B1462 User¡¦s Guide
5-2
5.2.1 VGA Driver(1) WIN 3.1 Driver
For the WIN31 operating system, user must in the DOS mode decompress the compress file. And then as to the
steps:
Step 1: Make the new created directory to put the VGA drivers.
C:\>MD VGAW31
Step 2: Insert the Utility Disk #2 in the floppy disk drive, and then copy the compress file—VGAWIN31.ZIP,
and the extract program—PKUNZIP.EXE, in the new created directory.
C:\>COPY A:\ VGAWIN31.ZIP C:\VGAW31
C:\>COPY A:\PKUNZIP.EXE C:\VGAW31
Step 3: Change directory to the new created directory, and extract the compress file.
C:\>CD VGAW31
C:\VGAW31>PKUNZIP -d VGAWIN31.ZIP
Step 4: In the DOS mode execute the SETUP.EXE file.
C:\VGAW31>SETUP
Step 5: The screen shows the chip type, and presses any key enter the main menu.
CHIPS 655XX - PCI Display Drivers
Preliminary Version 3.3.0
Step 6: There are some items for choice to setup. Please choose the <Windows Version 3.1> item, notice
the function key defined. Press [ENTER] selected the <All Resolutions>, when this line appears [*]
symbol, that means this item is selected. Press [End] starts to install.
Step 7: The screen will show the dialog box to demand user typing the WIN31’s path. The default is
C:\WINDOWS.
Step 8: Follow the setup steps’ messages execute. As completed the setup procedure will generate the
message as follow.
Installation is done!
Change to your Windows directory and type SETUP to run the Windows Setup program. Choose
one of the new drivers marked by an *. Please refer to the User’s Guide to complete the installation.
Step 9: Presses [Esc] return the main menu, and re-press [Esc] return to the DOS mode.
Step 10: And then re-name the OEM655XX.INF file as OEM65DGM.INF in the system directory of cwin31
directory. Acrosser recommends the method as:
C:\WINDOWS\SYSTEM>COPY OEM655XX.INF OEM65DGM.INF
Step 11: In the WIN31, you can find the <Chips CPL> icon located in the {CONTROL PANEL} group.
Step 12: Adjust the <Refresh Rate>, <Cursor Animation>, <Font size>, <Resolution>, and <Big Cursor>.