3. Click “Back to Zero Disk.” A message appears indicating that the system is
rebooting.
4. Wait for a while (approximately 3~5 minutes) until the following screen
appears. Click “Click to Configure RAID Profile” on the “Configuration
URL” column (Please refer to software installation STEP 3.1.5.)
5. The following screen appears. Select the preferred RAID configuration by
clicking the “CHANGE TO” drop down menu under “RAID Profiles,” then
click “CHANGE” (Please refer to software installation step 3.1.6.)
CAUTION: An improper reboot may affect the functionality of storage system in the next
startup.
62