SMC Networks SMCRPU600W manual Installing the RPU, RPU Packing List

INSTALLING THE RPU

The RPU may be placed on a desktop or mounted in a rack.

Caution: Warning: DO NOT place the RPU on the floor as the case is not waterproof.

RPU Packing List

•Redundant Power Unit — provides backup power to four SMC devices

•One AC Supply Power Cord — US, Continental Europe or UK

•One DC Backup Power Cord — with IEC connectors on both ends

•Rack Mounting Kit — brackets and screws

•Star-head screwdriver

•This User Guide

•Warranty Registration Card — be sure to complete and return to SMC

Desktop or Rack Mounting

You can set the RPU on a desktop or flat surface near a separate AC power source and close to the device to which it is to supply power. To mount the RPU in a standard EIA 19-inch rack, use the brackets and screws supplied with the RPU. Use a cross-head screwdriver to attach the brackets to the side of the switch. Position the RPU in the rack by lining up the holes in the brackets with the appropriate holes on the rack. And then use the supplied screws to mount the RPU in the rack. (Leave about two inches of space on the sides of the RPU to ensure adequate ventilation.)

3