142306
Before Putting Into Use
•Before connecting the appliance to the mains supply, leave it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.
•Clean the appliance, and be thorough, especially in the interior (See Cleaning and Maintenance).
•In case the interior accessories are not correctly placed, rearrange them as described in chapter "Description of the Appliance".
substantially higher. To restore efficiency, replace the gasket.
•The condenser on the rear wall should be always clean, free of dust or any impurities.
•Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and its correct and safe use. They were prepared for various types/models of refrigerators therefore you may find in it description of some functions and accesories that your appliance does not have.
We Care for the Environment
•Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. To this end, individual packaging materials are clearly marked.
•These instructions are printed either on recycled paper or chlorine free bleached paper.
•When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. (See Disposing of the Worn Out Appliance)
Tips for Energy Savings
•Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible. This is especially important if you have an upright model.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Set thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is, ambient temperature etc).
•Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature.
•Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is
•If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is
42 | Instructions for Use |
