Smeg ABM30, ABM40, ABM50 Instructions for the User, Using The Minibar, Cleaning And Maintenance

Models: ABM50 ABM40 ABM30

1 9
Download 9 pages 35.53 Kb
Page 9
Image 9
Instructions for the User

Instructions for the User

5. USING THE MINIBAR

To switch the refrigerator on, turn the knob of the thermostat in the bottom left-hand corner inside the appliance.

When the knob is turned to 0, the appliance is switched off.

The operating settings are from MIN (highest inside temperature) to MAX (lowest inside temperature). Only use the highest setting (MAX) if absolutely necessary: in some conditions, the refrigeration unit might operate continuously, causing excessive ice formation, leading to higher electricity consumption.

WHEN THE APPLIANCE IS USED FOR THE FIRST TIME AN UNPLEASANT SMELL IS NORMAL. THIS DOES NOT MEAN THE APPLIANCE IS MALFUNCTIONING; IT IS CAUSED BY DISPERSAL OF THE OILY RESIDUES LEFT DURING MANUFACTURING.

AFTER A FEW HOURS IN OPERATION, THIS SMELL WILL HAVE DISAPPEARED.

6. CLEANING AND MAINTENANCE

BEFORE CARRYING OUT THE OPERATIONS DESCRIBED BELOW, DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY.

Never clean the inside or outside of the minibar with granular or powder detergents, or abrasive sponges.

Use lukewarm water with a little delicate liquid detergent and dry with a chamois leather. Occasionally, about once a year, clean and dust the grille on the rear of the cabinet with a brush.

6.1 Changing the inside light bulb

To change the inside light bulb, FIRST OF ALL DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY.

After this, detach the bottom part of the light unit as shown below. Once it has been removed, replace the bulb with another of the same type.

Reverse the procedure to put the unit's cover back in place.

20

Page 9
Image 9
Smeg ABM30, ABM40 Instructions for the User, Using The Minibar, Cleaning And Maintenance, Changing the inside light bulb