Instructions for the installer
2. INSTALLATION OF THE OVEN
The oven must be set up on a perfectly flat surface and left standing free. Make sure to allow enough room at the back for easy access to the terminal strip for connection of the power cable to mains.
Installation must be carried out by a qualified technician in compliance with applicable regulations in force.
2.1 Electrical connection
Make sure that the power line voltage matches the specifications indicated on the rating plate located to the rear of the oven. This rating
plate must never be removed.
The connection terminals are located at the rear of the appliance. For electrical connections see following diagram. For access to the terminal board, remove the door located at the back of the oven.
For operation on 380-415V3N∼: use an
For operation on 220-240V∼: use an
The cable end to be connected to the appliance must be provided with an ground wire
22
