Instructions for the user
6. EXTRAORDINARY MAINTENANCE
The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Before any intervention, disconnect the power supply of the oven.
6.1 Replacing the light bulb
Remove protection cover A using a screwdriver to pry open. Replace bulb B with a similar one. Remount protection cover A.
Use only oven light bulbs (suitable for a temperature of up to 300°C).
6.2 Removing the door
Catch the door at the two sides with both hands in proximity to hinges C and lift up the small levers D. Lift the door upwards at an angle of about 45° and slide out. To remount, insert hinges C into the appropriate grooves, allow the door to rest downwards and release the small levers D.
6.3 Oven door seal
To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.
30
