Instructions for the Installer
2.2 Safety thermostat
The oven is fitted with a safety device tripped in case of a serious malfunction. To reset the safety device, call the
The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance.
2.3 Levelling
Level the oven by means of its four adjustable feet. To make the adjustment, undo the
2.4 Connection to the water supply
Connect the water inlet connection on the rear to a water supply outlet having ¾ gas threaded connection, taking care to screw tightly to the hose.
If the water supply pipe is new or has been unused for a long time, before making the connection turn the water on and allow it to flow out to ensure that it is clear and free from impurities. Otherwise, the water inlet may become fouled, damaging the oven.
The oven must be supplied with water at a pressure between min. 50 kPa and max. 500 kPa.
2.5Steam vent pipe (Mod. Alfa 200XE)
The top of the oven is fitted with a pipe
which vents the steam produced during cooking. This pipe must be left free of all obstructions. Take care not to obstruct it.
24
