Smeg AP704S3 manual Arrangement of burners on hob, Lubrication of gas taps, Burners, Auxiliary

Models: AP704S3

1 16

Page 13

Instructions for the installer

7 Double crown

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

Image 13

Contents

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionTHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED Introduction2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Create an opening with the Instructions for the installer Instructions for the installer 3. ELECTRICAL CONNECTIONInstructions for the installer 4. GAS CONNECTION4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products Instructions for the installer5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASInstructions for the installer Instructions for the installer 5.2 Regulation for LPGRated BurnerheatingLPG - G30/G31 28/37 mbar capacity kW 5.4 Regulation of primary air 5.3 Regulation for natural gasInstructions for the installer 6.1 Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG Instructions for the installer6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobInstructions for the installer This must be done by a qualified technician7.1 Ignition of the burners with safety device 7. USING THE HOB7.2 Practical advice for using the burners Insructions for the user7.3 Diameter of containers 7.4 Using a griddle plateInsructions for the user 8.1 Cleaning 8. CLEANING AND MAINTENANCE8.2 Cleaning of cooking hob components NEVER USE A STEAM JET TO CLEAN THE APPLIANCE