GB
Cleaning and maintenance
Cleaning
Disconnect the power supply at the mains socket before cleaning the inside of the cabinet.
The cabinet is best cleaned using warm water (max. 65°C) with a little mild detergent. Never use cleaning agents that scour. Use a soft cloth. Rinse with clean water and dry thoroughly. It is important to prevent water from entering the control panel.
The sealing strip around the door must be cleaned regularly to prevent discolouration and prolong service life. Use clean water.
After cleaning the sealing strip, check that it continues to provide a tight seal.
Dust collecting on the compressor and in the compressor compartment is best removed using a vacuum cleaner. It is possible to clean beneath the appliance by removing the kick plate.
Stainless steel or aluminium doors are best cleaned using a care spray and soft cloth. Various suitable products are available from most household appliance distributors.
If the appliance is not to be used for any length of time, switch it off, empty it, clean the cabinet and fittings, and leave the door(s) slightly open to allow air circulation and prevent smells.
Replacing the light bulb
Max. 12 W
fiig. 12
Unscrew the bulb without removing the shade.
Bulbs with an output of more than 12 W must not be used.
Save energy
-Cool hot food and beverages before placing them in the appliance.
-Thaw frozen items in a refrigerator.
-Keep the door(s) closed as much as possible
-Ensure that the door(s) is(are) not prevented from closing tightly.
12
