Transport instructions, Disposal, Appliance setup

en	en

Transport instructions	Location

The appliance should be transported only in upright position.

The packing as supplied must be intact during transportation.

If the appliance is transported in the horizontal position, it must be placed vertically and left in this position for 4 hours before taking into operation.

The appliance must be protected against rain, moisture and other atmospheric influences. The manufacturer assumes no liability if safety instructions are disregarded.

Disposal

Make the appliance unusable immediately. Pull out the mains plug and cut the power cable. Remove or destroy snap or latch locks before disposing of the appliance. In this manner you prevent children from locking themselves in and endangering their lives.

Appliance setup

•Do not operate your appliance in a room where the temperature is likely to fall below 10 °C at night and/or especially in winter. At lower temperatures the appliance may not operate, resulting in a reduction in the storage life of the food.

•The climate class rate of your appliance is given on the rating label located inside the appliance. It specifies the appropriate operating ambient temperatures as explained below.

Climatic class	Ambient temperatures
SN	+10 °C to 32 °C
N	+16 °C to 32 °C
ST	+18 °C to 38 °C
T	+18 °C to 43 °C
SN-ST	+10 °C to 38 °C
SN-T	+10 °C to 43 °C

Only place the appliance in dry rooms which can be ventilated.

Avoid direct sunlight or direct heat sources such as a stove or a heater.

If this cannot be avoided, the following minimum distances should be maintained:

From cookers	:3.00 cm
From heaters	:3.00 cm
From cooling devices	:2.50 cm

•Make sure that sufficient room is provided around the appliance to ensure free air circulation.

Fit the two plastic wall spacers supplied with the appliance rotating 1/4 turn to the condenser at the back of the appliance (Fig. 7).

•The appliance should be located on a level surface. The two front feet can be adjusted as required. To ensure that your appliance is standing upright adjust the two front feet by turning clockwise or counter-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise.

Electrical connections

Warning

This appliance must be grounded.

•Check whether the power type and voltage in your region corresponds to the one stated on the rating label inside the appliance.

•The electrical safety of the appliance is only assured when the grounding system in the house is installed in accordance with regulations.

•When placing the appliance, do not let the power cable get stuck under it; otherwise the cable will be damaged.

•Ensure that the plug remains readily accessible. Do not use a multiple adapter bar or an extension cable.

•The electrical specifications of your appliance is given on the rating label located inside the appliance.

•Route power cable to allow easy connection and disconnection after installation.

•A contact separator should be used if the power cable is not accessible. (for built-in models)

CV 250 AP specifications

The Smeg CV 250 AP is a standout appliance in the realm of modern kitchen design and functionality. Known for its sleek aesthetics and versatile features, this built-in vacuum packing machine is ideal for culinary enthusiasts and professionals alike.

One of the main features of the Smeg CV 250 AP is its intuitive touchscreen interface. This user-friendly control panel allows for seamless operation, enabling users to select various vacuum levels and modes with ease. The LED indicators provide clear visibility of the selected settings, making the process straightforward and efficient.

Equipped with advanced vacuum technology, the Smeg CV 250 AP ensures that food is preserved with precision. The unit employs a powerful motor that efficiently eliminates air from the vacuum bags, significantly extending the shelf life of food items while retaining their flavor and nutritional value. This is particularly beneficial for those who wish to store perishable items or marinate meats and vegetables for enhanced taste.

Another notable characteristic of the CV 250 AP is its compatibility with various bag sizes, offering flexibility for different food storage needs. The appliance can accommodate both pre-made vacuum bags and custom-sized bags, enhancing its versatility. Additionally, the integrated roll storage allows users to conveniently store and cut vacuum rolls as needed, further simplifying the bagging process.

The design of the Smeg CV 250 AP also reflects the brand's commitment to style. The appliance features a modern aesthetic with a stainless steel finish that complements any kitchen décor, making it a beautiful addition to both contemporary and classic settings.

Safety is an important aspect of the Smeg CV 250 AP. The machine includes an automatic shut-off feature, which prevents overheating during prolonged use. This not only ensures user safety but also promotes the longevity of the appliance.

Furthermore, the appliance's easy-to-clean components make maintenance hassle-free. The removable drip tray collects any residual moisture, and the accessible sealing bar can be easily wiped down, ensuring hygiene and convenience.

In summary, the Smeg CV 250 AP combines stylish design, advanced vacuum technology, and user-friendly features, making it an excellent choice for those looking to elevate their food preservation game in the kitchen. Whether for storage, marinating, or sous vide cooking, this appliance is a powerful assistant for every culinary task.

Smeg CV 250 AP instruction manual Transport instructions, Disposal, Appliance setup

Models: CV 250 AP