User instructions
E8
E9
FAULT | DESCRIPTION |
|
|
| Alternate washing system malfunction |
| Interrupt the program and switch off the |
| dishwasher. Switch the dishwasher back on, |
| program it again and start the washing cycle. If |
| the problem persists, contact the |
| service. |
Water intake system malfunction
Contact the
Light off | Light on | Light flashing |
If an alarm occurs the appliance interrupts the program in progress and signals a fault.
•Alarms E1, E2, E3, E4, E8 and E9 interrupt the current program immediately.
•The E5, E6 alarms interrupts the running program once the cause is resolved, it will bring bach the execution of the program.
•The alarm E7 is visualized at the end of the cycle that comes, however, brought to the end since the operation of the dishwasher is not harmed.
To “reset” an alarm is necessary:
•Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again.
If the malfunction persists, contact your authorised Service Centre.
TECHNICAL DATA
Width
Depth measured flush with the outer edge of the control panel
Height
597 ⎟ 599 mm
Free standing: 600 mm
Free standing from 850 mm to 870 mm
Capacity |
| 14 Standard place settings |
|
|
|
Water supply pressure |
| min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) |
|
|
|
Electrical characteristics |
| See rating plate |
34
