Smeg DW612ST User instructions, 3.3Washing programs, HALF LOAD WASH SETTING certain models only

Models: DW612ST

1 27
Download 27 pages 3.99 Kb
Page 10
Image 10
User instructions

User instructions

DISABLING THE ACOUSTIC DEVICE AND ADJUSTING THE FILLING SYSTEM The dishwasher’s electronic control system allows you to:

Disable the acoustic device which confirms all dishwasher programming and operating steps;

Adapt the dishwasher’s water filling system to the mains water pressure.

Programming procedure:

Press the PROGRAM SELECTION (2) and DELAYED START (3) buttons simultaneously for 3 seconds until the DISPLAY (6) shows the symbol of the parameter to be modified (see table);

Press the DELAYED START button (3) to modify the parameter;

Press the PROGRAM SELECTION button (2) to change the parameter for modification and/or to exit from the procedure.

DISPLAY SYMBOL

 

PARAMETER

 

ADJUSTABLE VALUE

 

EFFECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ACOUSTIC DEVICE

 

0

 

OFF

 

 

 

 

 

 

 

 

 

1

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

WATER PRESSURE

 

0

 

NORMAL

 

 

 

 

 

 

 

 

 

1

 

LOW

 

 

 

 

 

 

 

 

 

 

 

 

3.3Washing programs

The dishwasher is equipped with a control panel and an INFORMATION DISPLAY, described in chapter "3. Description of the controls", from which it is possible to carry out all the power switch- on, switch-off and programming operations.

See enclosed program table for washing cycles and the procedure for starting the dishwasher and switching it on/off.

Before starting a washing program make sure that:

The water supply tap is open.

The correct amount of detergent has been added to the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without obstruction.

The dishwasher door is securely closed.

HALF LOAD WASH SETTING (certain models only)

This function is especially suitable for loads up to 6 place settings and allows saving of water and electricity. It is controlled by the HALF LOAD button (5) and allows washing in the upper basket only.

IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.

A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.

CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.

31

Page 10
Image 10
Smeg DW612ST instruction manual User instructions, 3.3Washing programs, Before starting a washing program make sure that