User instructions
The washing cycle will not take place if the dishwasher door is left open or not properly closed.
TABLE FOR CERTIFICATION BODIES |
|
|
|
|
|
Reference standard | EN 50242 | |
|
|
|
Reference program |
| Selector on 3 + ECO 55°C button |
|
|
|
Load |
| 12 |
|
|
|
Type of detergent |
| B |
|
|
|
Amount of detergent |
| 30 g |
|
|
|
Rinse aid setting |
| Depending on the model 3/4 or 4/6 |
EN 50242
3.2Washing programs
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without obstruction.
•The dishwasher door is securely closed.
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and electricity. It is controlled by the HALF LOAD button (4) (see section "3. Description of the controls") and allows washing in the upper basket only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.
32
