Smeg ER17350FG, ER17450FG manual Arrangement of burners on hob, Lubrication of gas taps, Burners

Models: ER17450FG ER17350FG

1 15

Page 12

Instructions for the installer

1Auxiliary

2Semi-rapid

3Average rapid

4Large rapid

5-6Triple crown

7Double crown

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

Image 12

Contents

Contents Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USETHE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE NEVER UNPLUG BY PULLING ON THE CABLEIntroduction THE PLATE ON THE CASING MUST NOT BE REMOVEDInstructions for the installer 2. POSITIONING OF HOB3. ELECTRICAL CONNECTION Instructions for the installer4. GAS CONNECTION Instructions for the installer4.1 Connection to LPG 4.2 Ventilation of rooms4.3 Discharge of combustion products Instructions for the installer5. ADAPTATION TO DIFFERENT TYPES OF GAS 5.1 Removing the hobInstructions for the installer 5.2 Regulation for LPG Instructions for the installerRated Burner5.3 Regulation for natural gas 5.4 Regulation of primary airInstructions for the installer 6. FINAL OPERATIONS 6.1 Regulation of minimum for natural gas6.2 Regulation of minimum for LPG Instructions for the installer6.3 Arrangement of burners on hob 6.4 Lubrication of gas tapsInstructions for the installer This must be done by a qualified technician7. USING THE HOB 7.1 Ignition of the burners with safety device7.2 Practical advice for using the burners Instructions for the user7.3 Diameter of containers Instructions for the userBURNERS Auxiliary8. CLEANING AND MAINTENANCE 8.1 Cleaning8.2 Cleaning of cooking hob components Before any intervention, disconnect the power supply of the device