User instructions
PROGRAMMING
All programming operations are only possible with the door closed.
To select a new program, the dishwasher must be in the "Program start" state described above. Turn the PROGRAM SELECTOR (5) to the program of your choice (see "PROGRAMS TABLE").
START PROGRAM
Press the START/PAUSE button (3) for a few seconds, until the START/PAUSE light (4) starts to flash. A beep confirms the operation.
PROGRAM SEQUENCE
For the entire duration of the program, ON/OFF (2) indicator light remains permanently on, whereas the START/PAUSE
(4)indicator light flashes.
END PROGRAM
To indicate the end of the program, a short beep sounds and the ON/OFF (2) and START/PAUSE (4) lights illuminate simultaneously.
Before a new washing cycle can be selected the dishwasher must be in "Program start" state: press the START/PAUSE button (3) until the configuration of indicator lights (2) and
(4)is as follows.
INTERRUPTION OF A PROGRAM
Press the START/PAUSE button (3) for a few seconds, until the configuration of the ON/OFF (2) and START/PAUSE (4) lights is as follows.
You may now restart ("START PROGRAM") or change the program which was interrupted.
12
