Smeg KSE912XU manual Chimney assembly, Electrical Connection, Upper exhaust chimney

ELECTRICAL CONNECTION

•Remove the cover from the Field Wiring Compartment with a phillips screwdriver.

•Feed the Power Supply Cable through the electrical knockout. Connect the Power Supply Cable to the range- hood cable. At- tach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connec- tor. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector.

•Replace the cover.

Green Ground screw

Ground wire

Power supply cable

Chimney assembly

Upper exhaust chimney
• Slightly widen the two sides of the upper flue and hook them
behind the brackets 7.2.1, making sure that they are well
seated.
• Secure the sides to the brackets using the 4 screws 12c sup-	2.1
plied.	2

7.2.1

12c

Lower exhaust chimney

8b

2.2

8a

• Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.

• Fix the lower part laterally to the hood body using the 2 screws 12c supplied.

•On the recirculation version, fit the directional grids 8a – 8b in their housings making sure that the directional symbols are to- wards the top and front of the hood. Also make sure that they are correctly inserted in the connection extension pieces 14.1.

12c

EN	1
	10